image_rubrique_RECHERCHE
logo

Publications


Charles-André Gandin publications from 2004
Gildas Guillemot publications from 2011


Some articles of the "Structure, Properties, Solidification" team from 2007 to 2012 :


2012


3D CAFE modeling of grain structures: Application to primary dendritic and secondary eutectic solidification
T. Carozzani, H. Digonnet, Ch.-A. Gandin, Modeling and Simulation in Materials Science and Engineering 20 (2012) 015010
     

Analysis of a numerical benchmark for columnar solidification of binary alloys
H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, E. Arquis, O. Budenkova, B. Dussoubs, Y. Du Terrail, A. Kumar, Ch.-A. Gandin, B. Goyeau, S. Mosbah, T. Quatravaux, M. Rady, M. Zalo¸nik, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012086.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
      

Numerical tensile test on a mushy zone sample
J.-F. Zaragoci, L. Silva, M. Bellet, Ch.‑A. Gandin, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012054.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
     

Neutron diffraction analysis and solidification modeling of Impulse-Atomized Al-36 wt%Ni
A. Ilbagi, D. Tourret, H. Henein, Ch.‑A. Gandin, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012060.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
     

Prediction of solidification path and carbide precipitation in Fe-C-V-Cr-Mo-W high speed steels
H. Zhang, Ch.‑A. Gandin, J. He and K. Nakajima, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012061.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
     

Direct simulation of a directional solidification experiment observed in situ and real-time using X-ray imaging
G. Reinhart, Ch.-A. Gandin, N. Mangelinck-Noël, H. Nguyen-Thi, B. Billia, J. Baruchel, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012077.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
       

3D CAFE simulation of a macrosegregation benchmark experiment
T. Carozzani, H. Digonnet, M. Bellet, Ch.-A. Gandin, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012087.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
      

A multiphase segregation model for multicomponent alloys with a peritectic transformation
H. Zhang, Ch.‑A. Gandin, K. Nakajima and J. He, IOP Conf. Series: Materials Science and Engineering 33 (2012) 012063.
(XIIITh. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (Schladming, AT) 17‑22 June 2012)
    

2011


Investigation of columnar-to-equiaxed transition in solidification processing of AlSi alloys in microgravity – The CETSOL project
G. Zimmermann, L. Sturz, B. Billia, N. Mangelinck-Noël, H. Nguyen Thi, Ch. A. Gandin, D. J. Browne, W. U. Mirihanage, Journal of Physics: Conference Series 327 (2011) 012003.
(International Symposium on Physical Sciences in Space, Bonn, Germany, 11-15 July 2011
    

Containerless Solidification and Characterization of Industrial Alloys (NEQUISOL)
A Ilbagi, H Henein, J Chen, D M Herlach, R Lengsdorf, Ch-A Gandin, D Tourret, A Garcia-Escorial, Journal of Physics: Conference Series 327 (2011) 012007.
(International Symposium on Physical Sciences in Space, Bonn, Germany, 11-15 July 2011)
     

Distributions of structures and solute in directionally solidified Al – 7 wt % Si
K. Sabat Da Cruz, N. Mangelinck-Noël, Ch.-A. Gandin, B Billia, IOP Conf. Series: Materials Science and Engineering 27 (2011) 012017.
(3rd International Conference on Advances in Solidification Processes, Rolduc Abbey, Netherlands, 7 - 10 June 2011)
    

A method to determine the active particle nucleation undercooling distribution in a refined alloy
N. Mangelinck-Noël, J. E. Spinelli, Ch.-A. Gandin, G. Reinhart, H. Nguyen-Thi and B. Billia, IOP Conf. Series: Materials Science and Engineering 27 (2011) 012090.
(3rd International Conference on Advances in Solidification Processes, Rolduc Abbey, Netherlands, 7 - 10 June 2011)
    

Gas atomization of Al-Ni powders: solidification modeling and neutron diffraction analysis
D. Tourret, G. Reinhart, Ch. A. Gandin, G. N. Iles, U. Dahlborg, M. Calvo-Dahlborg, C. M. Bao, Acta Materialia 59 (2011) 6658-6669
     

Multiple non-equilibrium phase transformations: Modeling versus electro-magnetic levitation experiment
D. Tourret, Ch.-A. Gandin, T. Volkmann, D.M. Herlach, Acta Materialia, 59 (2011) 4665-4677
    

2010

  Modelling of Heat and Solute Interactions upon Grain Structure Solidification
Ch. A. Gandin, J. Blaizot, S. Mosbah, M. Bellet, G. Zimmermann, L. Sturz, D. J. Browne, S. McFadden, H. Jung, B. Billia, N. Mangelinck, H. Nguyen Thi, Y. Fautrelle, X. Wang,in Proceedings of the Solidification and Gravity conference, editors A. Roósz, V. Mertinger, P. Barkóczy, Cs. Hoó, Materials Science Forum 649 (2010) pp. 189-198. Trans Tech Publications, Switzerland.
(Conference Solidification and Gravity 2008, Miskolc, Hungary, 31 August - 4 September 2008).
      
  Droplet Solidification of Impulse Atomized Al-0.61Fe and Al-1.9Fe
Hani Henein, Vincent Buchoud, Ralf-Roman Schmidt, Chuck Watt, Dmitri Malahof, Charles-André Gandin, Gérard Lesoult, Volker Uhlenwinkel, Canadian Metallurgical Quarterly 49 (2010) 275-292. MetSoc Best Paper Award 2011.
    
  CAFE Modelling of Segregation and Structure in Levitated Droplets
S. Mosbah, M. Bellet, Ch.-A. Gandin, in Proceedings of the Solidification and Gravity conference, editors A. Roósz, V. Mertinger, P. Barkóczy, Cs. Hoó, Materials Science Forum 649 (2010) pp. 237-242. Trans Tech Publications, Switzerland.
(Conference Solidification and Gravity 2008, Miskolc, Hungary, 31 August - 4 September 2008).
    
  Relationships between processing conditions and mechanical properties of PA12 tubes. The EWF approach
Boyer Séverine A.E., Haudin Jean-Marc, Polym.Test., vol. 29, p. 445-452, 2010.
   
  Crystallization of polymers at constant and high cooling rates: A new hot-stage microscopy set-up
Haudin Jean-Marc, Carin Aurélien, Amouroux Nicolas, Bellet Gaëlle, Montezin Fabrice, Int. J. Mater. Form., vol.3, p. 225-231, 2010.
  

Modeling of solidification: Grain structures and segregations in metallic alloys
Gandin Charles-André, Comptes-rendus Physique, doi:10.1016/j.crhy.2010.07.010
    
  Prediction of Solidification Paths for Fe-C-Cr Alloys by a Multiphase Segregation Model coupled to thermodynamic equilibrium calculations
Hongwei Zhang, Charles‑André Gandin, Haithem Ben Hamouda, Damien Tourret, Keiji Nakajima, Jicheng He, ISIJ International, vol.50 (2010), n°12, pp 1859-1866.
   

Experimental and numerical modeling of segregation in metallic alloys
Mosbah Salem, Bellet Michel, Gandin Charles-André, Metallurgical and Materials Transactions 41, 3 (2010), pp. 651-669, doi: 10.1007/s11661-009-0141-6
    

2009

  A solidification model for atomization
Arvind Prasad, Salem Mosbah, Hani Henein, and Charles-André Gandin, ISIJ International, Vol. 49 (2009), No. 7, pp. 992–999.
      
  Call for contributions to a numerical benchmark problem for 2D columnar solidification of binary alloys
M. Bellet, H. Combeau, Y. Fautrelle, D. Gobin, M. Rady, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar, C.A. Gandin, B. Goyeau, S. Mosbah and M. Zalo¸nik, International Journal of Thermal Sciences 48 (2009) 2013-2016, 49 (2010) 1318.
     
  Numerical Modeling of Columnar to Equiaxed Transition – Application to Microgravity Experiments
A. Noeppel, O. Budenkova, G. Zimmermann, L. Sturz, N. Mangelinck‑Noël, H. Jung, H. Nguyen-Thi, B. Billia, Ch.‑A. Gandin, Y. Fautrelle, International Journal of Cast Metals Research 22 (2009) 34-38.
      
  Simulation of solidification grain structures with a multiple diffusion length scales model
S. Mosbah, M. Bellet, Ch.-A. Gandin, Modeling of Casting, Welding and Advanced Solidification Processes XII, 485-493, 2009. TMS, Warrendale, PA, USA
    
  Microsegregation modeling of multiple phase transformations – Atomization of Al-Ni alloys
D. Tourret, Ch.-A. Gandin, Modeling of Casting, Welding and Advanced Solidification Processes XII, 485-493, 2009. TMS, Warrendale, PA, USA
     
  Shear-induced crystallization of isotactic polypropylene based nanocomposites with montmorillonite
Artur Rozanski, Bernard Monasse, Ewelina Szkudlarek, Andrzej Pawlak, Ewa Piorkowska, Andrzej Galeski, Jean-Marc Haudin, Europ. Polym. J., vol. 45, p. 88-101, 2009
     
  Adhesion in polypropylene/aluminum laminates made by extrusion coating
Samuel Devisme, Jean-Marc Haudin, Jean-François Agassant, Robert Combarieu, Damien Rauline, Fabrice Chopinez, J. Appl. Polym. Sci., vol. 112, n° 5, p. 2609-2624, 2009
    
  Phase transitions of polymers over T and P ranges under various hydraulic fluids: Polymer/supercritical gas systems and liquid to solid polymer transitions
Séverine A.E. Boyer, Jean-Pierre E. Grolier, Hirohisa Yoshida, Jean-Marc Haudin, Jean-Loup Chenot, J. Mol. Liquids, vol. 147, n°s 1-2, p. 24-29, 2009
   

A generalized segregation model for concurrent dendritic, peritectic and eutectic solidification
D. Tourret, Ch.-A. Gandin, Acta Materialia (2009) 2066-2079
     

A Comparison of CET Prediction Methods using Simulation of the Growing Columnar Front
S. McFadden, D.J. Browne, and Ch.-A. Gandin, Metallurgical Transactions 40A (2009) 662-672.
      

Materials Solidification Physics in Space
L. Ratke, CH.-A. Gandin, R.H. Mathiesen, M. Rappaz and S. Rex, europhysicsnews, volume 39, number 5 (2009) 22 24
     

2008

  The Effect of Eutectic Undercooling on Microsegregation of Rapidly Solidified Al-Cu Powders
A. Prasad, H. Henein, Ch.-A. Gandin, Journal of the Japan Society of Microgravity Application 25 (2008) 449-452
     
  Non-Equilibrium and Near-Equilibrium Solidification of Undercooled Melts of Ni- and Al-based Alloys
D. M. Herlach, R. Lengsdorf, P. Galenko, H. Hartmann, Ch.-A. Gandin, S. Mosbah, A. Garcia-Escorial, H. Henein, Advanced Engineering Materials 10 (2008) 444-452
   
  Experimental and numerical modeling of equiaxed solidification in metallic alloys
Ch. A. Gandin, S. Mosbah, Th. Volkmann, D. M. Herlach, Acta Materialia 56 (2008) 3023-3035
   
  Modelling of structure development during polymer processing
Haudin Jean-Marc, Smirnova Julia, Silva Luisa, Monasse Bernard, Chenot Jean-Loup, Advanced Engineering Materials, Polym. Sci., Ser. A, vol. 50, p. 538-549 2008, publié en russe dans Vysokolmolekulyarnye Soedineniya, Ser. A, vol. 50 (2008) 827-840
    
  A mechanical model for stress development in PA12 tube extrusion. Application to structure development
Haudin Jean-Marc, Carin Aurélien, Parant Olivier, Guyomard Aurélie, Vincent Michel, Peiti Christian, Montezin Fabrice,Intern. Polym. Proc., vol. 23 (2008 ) 55-64
    
  Polymers Microstructures. Modifications and Characterization by Fluid Sorption
Boyer Séverine A.E., Baba Mohamed, Nedelec Jean-Marie, Grolier Jean-Pierre E., Int. J. Thermophys., vol. 29 ( 2008) 1907-1920
    

Direct Modeling of Structure Formation
Ch.-A. Gandin and I. Steinbach, ASM, Materials Park, OH, S. Viswanathan, Handbook, vol.15 (2008) 435-444
    

2007


Interaction between single grain solidification and macrosegregation: application of a cellular automaton - finite element model
G. Guillemot, Ch.‑A. Gandin, M. Bellet, Journal of Crystal Growth 303 (2007) 58‑68.
      

Modeling of precipitate free zone formed upon homogenization in a multi‑component alloy
Ch.-A. Gandin, A. Jacot, Acta Materialia 55 (2007) 2539-2553.
     
B.P. 207 - 06904 Sophia Antipolis Cedex
logo S&CC
logo Transvalor
logoCNRS
logoEcoleMinesParis
logoArmines
logoSphere
logoCarnot